4.1 Activate functionPress several times the [UNIT] key to change the display between activated units,piece counting, percentage and density determination mode.This does not require additional software.Settings have to be activated in the menu:Repeatedly press the [CAL] key until "FUnC.SEL" appears.Press [TARE] key(Example)Repeatedly press the [CAL] key until "Unit.SEL" appears.Press [TARE] keyUse the [CAL] key, to select the settings below:„ U- ,d“ („ ,“ this is an upside down triangle)Current settings are indicated by the standstill display ( ).Confirm your selection by pressing the [TARE] key.The [TARE] key is also used to deactivate a unit or function ifthe corresponding setting with standstill display is shown in thedisplay.Repeatedly press the [ON/OFF] key. This takes you back to themenu/weighing mode.32 ABT-A01-BA-defsi-0710