KERN CDS 4K0.02 Operating Instructions Manual

Also see for CDS 15K0.05: Operating manual Operator's manual Operating manual Operating instructions

35 TCDS-BA-e-2210Procedure:3. Define limit values Make sure that the scale is in counting mode and that anaverage piece weight has been defined (see chap. 9.2.1).If necessary, switch over with the key. Call up menu setting < ref >. Use the navigation keys  to select the setting < check limits > and confirm with ➔ button.< limupp > will appear. Press ➔ button to confirm, the numeric input window forentering the upper limit value will appear.The active digit is flashing. Enter upper limit value (numerical input see chap. 3.2.2)and confirm the entry.The balance returns to the < limupp > menu. Use the navigation keys  to select setting < limlow >. Press ➔ button to confirm, the numeric input window forentering the lower limit value will appear. The active digit isflashing. Enter lower limit value (numerical input see chap. 3.2.2)and confirm the entry.The balance returns to the < limlow > menu. Press repeatedly -button to exit menu. Finished thesetting works, the weighing balance will be ready for checkcounting.