KERN CDS 4K0.02 Operating Instructions Manual

Also see for CDS 15K0.05: Operating manual Operator's manual Operating manual Operating instructions

45 TCDS-BA-e-221011.2 Issue functions11.2.1 Add-up mode < sum >With this function the individual weighing values are added into the summationmemory by pressing a button and edited, when an optional printer is connected.Activate function: In Setup menu invoke the menu setting < Print sum > and confirm onbutton ➔. Use the navigation keys  to select the setting < on > and confirm on ➔button. To exit the menu press the navigation key  repeatedlyCondition: Menu setting< prmode  trig  manual  on >Add-up weighed goods: If required, place empty container on scale and tare. Place first good to be weighed on balance. Wait until stability display ( )appears and then press the PRINT-button. The display changes to < sum1 >,followed by the current weighing value. The weighing value is stored and editedby the printer. The symbol  pops up. Remove the weighed good. Place second good to be weighed on balance. Wait until stability display ( )appears and then press the PRINT-button. The display changes to < sum2 >,followed by the current weighing value. The weighing value is stored and editedby the printer. Remove the weighed good. Add-up more weighed goods as described above. You can repeat this process until the capacity of the scales is exhausted.Display and edit sum „Total“: Press the PRINT key long time. The number of weighings and the total weight areedited. The sum memory is deleted; the symbol [..] extinguishes.