KERN EOC 6K-3 Operating Manual

Also see for EOC 100K-2: Operating manual Operating manual

EOC-BA-e-1711 297.8 Weighing with tolerance rangeYou can set an upper or lower limit when weighing with tolerance range and thusensure that the weighed load remains exactly within the set limits.During tolerance tests such as dosing, portioning and sorting the unit will indicateexceeded or undershot limits by emitting an optical or acoustic signal.Audio signal:The acoustic signal depends on the settings in menu block „BEEP“.Options:• no Acoustic signal turned off• ok An acoustic signal sounds when load is within tolerancelimits• ng An acoustic signal sounds when load is beyond tolerancelimitsOptical signal:The symbols indicate whether the load is within the two tolerancelimits.Target quantity / target weight below minimum tolerance limitTarget quantity / target weight within tolerance rangeTarget quantity / target weight exceeds maximum tolerance limitThe settings for tolerance check may be called up either via menu block „P0 CHK“(see chap. 8.2) or faster via the key combination+