KERN EOC 6K-3 Operating Manual

Also see for EOC 100K-2: Operating manual Operating manual

EOC-BA-e-1711 33Press repeatedly until „BEEP“ will be displayed.Press , the current setting for the acoustic signal willbe shown.Select desired setting (no, ok, ng) by .Confirm input by .Press ; weighing system is in tolerance weighingmode. From here evaluation takes place whether the loadis within the two tolerance limits.Weighing with tolerance range:Determine the item weight, see chap. 7.11Tare when using a weighing container.Put on goods to be weighed, tolerance control is started.The symbols show whether the load iswithin the two tolerance limits.Load below specifiedtoleranceLoad within specifiedtoleranceLoad exceeds specifiedtolerance• The tolerance control is not active when the weight is under 20d.• To delete limits, enter „00000 PCS“.