KERN ITT Operating Instruction

Also see for ITT: Service manual

OperationITT-BA-e-072016User manual ME-Nr.:22017083 01/07With automatic start PrerequisiteAVErAGE -> AUtO is selected in the menu.The weighing sample must be heavier than 5 scale divisions.1. Place the weighing sample on the scale.The scale starts the dynamic weighing automatically.During dynamic weighing, horizontal segments appear in the display, and thedynamic result is then displayed with the symbol *.2. Unload the scale to be able to perform a new dynamic weighing operation.2.7 Weighing-in to a target weight and checkweighingThe terminal allows the weighing-in of goods to a particular target weight withindefined tolerances. With this function it is possible to check whether weighed materialsare within a defined tolerance range.The terminal has a total of 100 memory locations for frequently used tare values, aver-age piece weights, target weights and target quantities. In the factory setting, the mem-ory locations 81 to 90 are reserved for target weights. The saved target weights arealso preserved when the terminal is switched off.2.7.1 Saving target weights1. Enter the memory location number (factory setting: 81 ... 90) and keeppressed until the confirmation tArGEt appears in the display.2. Enter the target weight in the defined unit, e.g. 1.5 kg, and confirm with .The display tOLER appears and + flashes.3. Enter the upper tolerance in the displayed weight unit, e.g. 0.1 kg, and confirm with:-or-➜ Press , enter the upper tolerance range in per cent and confirm with .The display tOLEr appears and – flashes.4. Enter the lower tolerance accordingly.The scale returns to weighing mode.Note If a target weight had already been saved under the selected memory location, themessage rEPLACE appears in the display.• To save the new target weight, press . The old target weight is overwritten.• To abort the save process, press . The previous memory location assignmentremains valid.