OperationITT-BA-e-072018User manual ME-Nr.:22017083 01/072.8 Working with identificationsWeighing series can be assigned 2 identification numbers ID1 and ID2 with up to40 characters that are also printed out on the protocols.If for example a customer number and an article number are assigned, it can beclearly seen on the protocol which article was weighed for which customer.2.8.1 Entering identification1. Enter identification and press .IdENt 1 appears in the display.2. If the entered identification is to be saved as ID1, press . If the entered identi-fication is to be saved as ID2, first press , and then press .The scale returns to weighing mode.2.8.2 Displaying identification➜ Displaying ID1: Briefly press once.The number currently assigned to the ID1 appears in the display. If no ID1 wasassigned, no Id appears.➜ Displaying ID2: Briefly press twice.The number currently assigned to the ID2 appears in the display. If no ID2 wasassigned, no Id appears.2.8.3 Clearing identifications1. Briefly press once to display ID1 or briefly press twice to display ID2.2. Press for as long as the identification is displayed.The clearing is briefly confirmed with the message CLEArEd.2.9 Printing resultsIf a printer or computer is connected to the scale, the weighing results can be printedout or sent to a computer.➜ Press .The display contents are printed out and transferred to the computer. SeeSection 8.2 for sample protocols.