KERN ITT Operating Instruction

Also see for ITT: Service manual

ITT-BA-e-072027CountingUser manual ME-Nr.:22017083 01/073.9.4 Clearing saved target quantities1. Enter the number of the memory location with the target quantity to be cleared (fac-tory setting: 91 ... 100) and press briefly.The saved target quantity with tolerances is displayed.2. Press within 2 seconds.CLEArED briefly appears in the display. The saved target quantity is cleared.3.10 Counting with two scalesFor piece counting, it is possible to connect a second scale or weighing platform, e. g.a floor scale for counting a large number of pieces via the optional analog secondscale interface.The necessary settings for the application and interface parameters are described inthe Sections 4.4.1, 4.6.1 and 4.6.4.3.10.1 Counting with a reference scalePrerequisiteThe connected second scale is configured as reference scale.1. Place the reference parts on the reference scale and press or .The scale determines the average piece weight and changes to the display inpieces (PCS).2. Place the parts to be counted on the first scale.The total quantity is displayed.Note • If tOtAL-Ct -> bULK is set in the menu, only the number of pieces on the bulkscale is displayed.• If tOtAL-Ct -> bOtH is set in the menu, the reference quantity is added to thebulk quantity.