KERN KFE-TM Operating And Installation Instructions

Also see for KFE-TM: Instruction manual Supplementary instructions Manual Manual

KERN KFE-TM Operating And Installation Instructions Manual pdf 10 page image

6 Unpacking and installation6.1 Installation Site, Location of UseThe display units are designed in a way that reliable weighing results are achieved incommon conditions of use. Precise and fast work is achieved by selecting the rightplace for your display unit and your weighing plate.On the installation site observe the following:Place the display unit and the weighing plate on a stable, even surface.Avoid extreme heat as well as temperature fluctuation caused by installingnext to a radiator or in the direct sunlight;Protect the display unit and the weighing plate against direct draft from openwindows or doors.Avoid jarring during weighing;Protect the display unit and the weighing plate against high humidity, vapoursand dust.Do not expose the display unit to extreme dampness for longer periods oftime. Non-permitted condensation (condensation of air humidity on theappliance) may occur if a cold appliance is taken to a considerably warmerenvironment. In this case, acclimatize the disconnected appliance for ca. 2hours at room temperature.Avoid static charge of goods to be weighed or weighing container.Major display deviations (incorrect weighing results) may be experienced shouldelectromagnetic fields (e.g. due to mobile phones or radio equipment), staticelectricity accumulations or instable power supply occur. Change location or removesource of interference.6.2 Unpacking and installationTake the display unit carefully out of its packaging, remove the plastic jacket andinstall it at the designated work space. Mount the display unit in a way that facilitatesoperation and where it is easy to see.6.3 Scope of delivery / serial accessories:For display unit, see chapter 2Mains adapterOperating instructions10 KFE-TM-BA_IA-e-1313