KERN KFE-TM Operating And Installation Instructions

Also see for KFE-TM: Instruction manual Supplementary instructions Manual Manual

KERN KFE-TM Operating And Installation Instructions Manual pdf 19 page image

7.5 Weighing with taring Deposit weighing vessel. After successful stop check press the button. Zerodisplay and indicator NET appear.The weight of the container is now internally saved. Weigh the material, the net weight will be indicated. After removing the weighing container, the weight of the weighing containerappears as negative display. The taring process can be repeated any number of times, e.g. when addingseveral components for a mixture (adding). The limit is reached when the wholeweighing range is exhausted. To change between gross weight and net weight, press . To delete the tare value, remove load from weighing plate and press .7.6 Weighing with tolerance rangeYou can set an upper or lower limit when weighing with tolerance range and thusensure that the weighed load remains exactly within the set limits.During tolerance controls such as dispensing, portioning or sorting the unit willindicate whether a value exceeds or falls short of limits with an optical [LO, OK, HI]as well as an audio signal according to the setting in the menu block “F4oFF_BEEP“; see chapter 8.2.Selectable mode DescriptionAcoustic signal switched off, only optical signal activebp 1 [LO], [OK] or [HI]If load is within tolerance range, [ok] will be displayedbp 2 and audio signal will be sounded.If the load is beyond the tolerance range [ok] will bebp 3 shown and the audio signal will sound.KFE-TM-BA_IA-e-1313 19