12 KXS/KXG-TM-BA_IA-e-17223 Basic Information (General)3.1 Proper useThe display unit acquired by you is used in combination with a load cell and serves todetermine the weighing value of material to beweighed. It is intended to be used asa “non-automatic weighing system”, i.e. the material to be weighed is manually andcarefully placed in the centre of the weighing plate.As soon as a stable weighingvalue is reached the weighing value can be read.3.2 Improper UseDo not use weighing system for dynamic weighing.In the event that small quantitiesare removed or added to the material to be weighed, incorrect weighing results canbe displayed due to the “stability compensation“ in the display unit.(Example: Slowlydraining fluids from a container on the balance.)Do not leave permanent load on the weighing pan.This may damage the measuringsystem.Impacts and overloading exceeding the stated maximum load (max) of the weighingplate, minus a possibly existing tare load, must be strictly avoided. Both, the weighingplate and the display unit may be damaged during this process.Never operate display unit in explosive environment.The serial version is notexplosion protected.Changes to the display unit'sdesign are not permitted.This may lead to incorrectweighing results, safety-related faults and destruction of the display unit.The display unit may only be operated in accordance with the described defaultsettings. Other areas of use must be released by KERN in writing.3.3 WarrantyWarranty claims shall be voided in case• Our conditions in the operation manual are ignored• The appliance is used outside the described uses• The appliance is modified or opened• Mechanical damage or damage by media, liquids, natural wear and tear• The appliance is improperly set up or incorrectly electrically connected• The measuring system is overloaded
