KERN PFB Operating Manual

KERN PFB Operating Manual Manual pdf 23 page image

PFB-BA-e-1322 236.10 Operation with second display unit PFB-A08 for open points of saleFor the use in open points of sale, operation with a second display unit is required.In the models PFB 600-1M and PFB 6000-0M this (PFB-A08) is already existing.The second display unit is exclusively suitable for theconnection to KERN balances.For configuration proceed as follows:First adjust on the balance the following:In the menu select menu item „F3 Con“ and adjust the continuous printedoutput „P Cont“Moreover set the baud rate to „9600“Adjust the Sale mode: Setting „SALE Y“ = 6000 eThe totalizing function is not availableOnly the weighing unit Gram is available Start balance by pressingONOFF . While thebalance carries out a self test, press until„F1 Unt“ appears Press repeatedly until „SALE n“ isdisplayedPress adjustment switch on the lower side of the balance! Press Press , „SALE Y“ is displayed Confirm setting byThe balance changes automatically into weighing modethus being limited to max. 6000e.