KERN PFB Operating Manual
                                                | |
Contents
| 
30 PFB-BA-e-13228.3 Parts countingBefore the balance can count parts, it must know the average part weight(i.e. reference). Proceed by putting on a certain number of the parts to be counted.The balance determines the total weight and divides it by the number of parts (the so-called reference quantity). Counting is then carried out on the basis of the calculatedaverage piece weight.The higher the reference quantity the higher the countingexactness.8.3.1 Non-verifiable modelsBalance display Operation Start balance by pressingONOFFThe balance will carry out a self-test.Wait for „0.0“ display. PressAppears the reference quantity „10“.By pressing the key several times, thereference quantities 10, 20, 50, 100, 200 can be set Place as many parts to count on the weighing plateas the set reference quantity requires. Confirm by pressing(Example)The balance is now in parts counting mode and countsall units on the weighing plate. PressThe balance is in weighing mode and displays theweight of the counted parts. Remove the load Back to weighing mode by pressing again thebutton. |
Related manuals for KERN KERN PFB
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine