PLJ-N-BA-e-1333167.1 Automatic adjustment using internal weightWith the internal adjustment weight, the weighing accuracy can be checked and re-adjusted at any time.The automatic adjustment function is always enabled. You can start adjustment atany time by pressing the CAL-key manually.Automatic adjustment is started each timeafter the weighing balance was disconnected from the mainswhen temperature changes take placeat the end of a time intervalTemperature / time controlled adjustment is taking place:5 minutes before the start of automatic adjustment, this will be announced by a "º C“,(change of temperature) or a “►“ (after a certain time interval ends) symbol on thedisplay.orThe user must complete his/her weighing process within this time.After 5 minutes [ ] appears on the display.This starts a “count down” of 30 seconds [ ] [ ]. During these 30seconds it is possible to cancel the adjustment by pressing the TARE key. Thismakes the balance return to weighing mode in order to e. g. complete an unfinishedmeasurement.After a further 5 minutes the automatic adjustment will restart and [ ]appears.
