PLJ-N-BA-e-1333 2910 Basic Operation10.1 Simple weighing Start balance by pressing the ON/OFF-key and wait for zero display [ ].If an exact zero reading is not displayed on the balance in spite of theweighing dish being empty, press the TARE-key and the balance will startresetting to zero. To change to different weighing units, press the UNIT-key [g], [mg], [ct]. Place goods to be weighed on balance Wait until the stability display appears [ ] Read weighing result. Turn off balance by pressing the ON/OFF key.10.2 Weighing with taringThe dead weight of any weighing container may be tared away by pressing a buttonor by numerical input, so that the following weighings show the net weight of thegoods to be weighed.10.2.1 Taring Place the weighing box and press the TARE-key. The zero display appears.The tare weight is saved until it is deleted.Information:The tare procedure can be repeated as many times as necessary, forexample with initial weighing of several components for a mix (add-onweighing). The limit is reached when the total weighing range capacity is full.After removing the taring container the total weight is displayed as negativedisplay.10.2.2 Delete tare Unload the balance and press the TARE –key; the zero display appears.
