KIDDY Evolution Pro 2 Instruction Manual

Contents

KIDDY Evolution Pro 2 Instruction Manual Manual pdf 17 page image

11ENNever use the Evolution Pro 2 in the reclined position in a vehicle. Thereclined position is intended for use outside the vehicle only.5.2 Using the newborn inlayThe Evolution Pro 2 is equipped with a comfort inlay for newborns.This inlay ensures a more level position of your baby in the infant car-rier. This comfort inlay may only be used for babies up to the age of6 months (fig. 3). To remove the inlay, open the buckle and removethe inlay from the shoulder belts.Premature babies: A special inlay for premature babies, which offersa significantly better seating and reclined position, is available as anaccessory.5.3 Using the sunshadeTo extend the sunshade pull the hood towards the foot end of thecar seat. To retract the sunshade, push towards the head end of thecar seat.6. Buckling / Unbuckling of the baby6.1 Loosening the belt systemTurn the carry handle in to the carry position. Before you can adjustthe height of the shoulder belts, the belt system must be loosened.For this purpose, keep the central adjuster pressed in the front un-der the seating area (fig. 4, no. 1), and pull the shoulder belts (fig. 4,no. 2) out.6.2 Adjusting the height of the belt systemOpen the front cover at the head end of the infant carrier by slightlypressing the hooks upward (fig. 5, no. 1), now the cover opens (fig. 5,no. 2). Now turn the height adjuster handle 90° clockwise (fig. 6, no. 1)and pull the handle outward (fig. 6, no. 2), then move it into the desired