KIDDY Evolution Pro 2 Instruction Manual

Contents

KIDDY Evolution Pro 2 Instruction Manual Manual pdf 18 page image

EN12position upward or downward (fig. 6, no. 3). The shoulder belts haveto be adjusted so that they are at the baby’s shoulder height (fig. 7).Lock the handles back into place after you have finished. Please makesure that the belt system is not twisted or does not become lodged!Close the front cover.6.3 Buckling / Unbuckling of the babyAlways buckle up your child when it is in the infant carrier! Loosen theshoulder belts as described in point 6.1 and place them over the sideof the rim of the carrier.Place your baby in the infant carrier and then position the shoul-der belts over its shoulders (fig. 8, no. 1). Place the safety belt locktongues attached to the shoulder belts over each other (fig. 8, no. 2).Now push the safety belt lock tongues into the buckle. It is locked inplace when a click sound is heard (fig. 9). Make certain that it is se-curely locked in place! Now pull the central belt until the belt systemfits the body of the child snugly (fig. 10)!Make sure that the space between the belts and your child is no morethan the width of a finger (approx. 1 cm) and that the belt system isnot twisted.Loosen the shoulder belts as described in point 6.1 and press the redbutton on the buckle to unbuckle your baby. Now you can take thechild out of the seat.