KIDDY Evolution Pro 2 Instruction Manual

Contents

KIDDY Evolution Pro 2 Instruction Manual Manual pdf 21 page image

15EN7.2.2 Installation steps on the Isofix platformFirst the Isofix platform has to be properly mounted in the vehicle. Forthis purpose, please refer to the instruction manual for the Isofix plat-form.Place the carriage in the foremost position. Slide the side releasingslide at the knee of the platform to the back (fig. 16, no. 1) and pull thecarriage forward at the same time (fig. 16, no. 2).Now place the Evolution Pro 2 from above onto the Isofix plat-form, so that the locking bars are in the grooves of the platform(fig. 17). If necessary, press the infant carrier down.The green display’s at the front and side of the slide indicates wheth-er the seat is locked securely (fig. 18). If the green displays are notvisible this means that the Evolution Pro 2 has not been properly fas-tened to the platform!The final step involves pushing the releasing slide (at the side of theknee) back (fig. 19, no. 1) and securely sliding the carriage at the pad-ding of the vehicle seat’s backrest (fig. 19, no. 2). Now let the releas-ing slide go. The next locking position can be found by moving thecarriage.The carriage must be securely locked and if this is the case, the greendisplay will become visible (fig. 19, no. 3).7.2.3 Removal from the Isofix platformTo remove the Evolution Pro 2 from the Isofix platform, keep therelease handle for the infant carrier, which can be found above thefront cover, pull (fig. 20, A) and lift the infant carrier from the Isofixplatform (fig. 20, B).Your Isofix platform is also equipped with a mechanism to releasethe infant carrier. If you pull the releasing handle at the front of thecarriage (fig. 21, A), you can remove the seat in an upward movement(fig. 21, B).