KaVo ESTETICA E30 Instructions For Use Manual

Also see for ESTETICA E30: Service instructions Short instructions for use Short instructions for use Care Instructions Instructions for use

Contents

Instructions for use ESTETICA E304 Operation | 4.11 Using instruments88 / 134NoteIf no patient is selected, the images stay in the "Swap Tray" and are notsaved permanently. As soon as a patient is selected, these temporary data inthe "Swap Drying" are deleted. When an active patient is logged off (or anew patient is logged on) in CONEXIO, a query is shown asking whether theimages shall be deleted or saved. Data deleted at this point cannot be re-stored subsequently.4.11 Using instrumentsNoteConsult the pertinent separate instructions for information regarding the in-stallation, use and servicing of the individual handpieces (such as the turbine,PIEZOsoft, Satelec Mini LED, etc.).4.11.1 Setting spray air and spray waterThe adjusting screws for spray air and spray water are situated on the under-side of the table and correspond to the handpiece that is actually connected.For KaVo Midwest handpieces, spray air and spray water are pre-set suitable atthe factory such that no re-adjustment is required.321▶ Use the short adjusting screw ② on the control valve to adjust the sprayair.ð Counterclockwise rotation (seen from below) increases the flow rate.▶ Use the long adjusting screw ① on the control valve to adjust the spray wa-ter.ð Counterclockwise rotation (seen from below) increases the flow rate.