KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual

Also see for ORTHOPANTOMOGRAPH OP 3D: User and installation manual Service manual Quick guide User manual Installation manual

Contents

KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual Manual pdf 80 page image

7 Maintenance7.4 Annual maintenanceAn authorized service technician must carry out a full inspection of the device once ayear.The following checks must be carried out during the inspection:• Check that the mains cord is not damaged in any way.• Check that the protective earth is connected.• Check that all fixing screws are tight.• Check that the positioning lights operate correctly and are aligned correctly.• Check that no oil is leaking from the tubehead.• Check that all covers and mechanical parts are correctly secured and have not comeloose.• Check that any vents in the covers are not blocked with dust and that no dust hasaccumulated inside the device.• Check the functionality of the power switch.• Check the functionality of the Emergency Stop button.• Check the Z-movement limits.• Check that the exposure warning indicators work correctly.• Check device movements and functionality of exposure switch.During the annual maintenance, all calibrations and QC programs must be performedaccording to chapter Complete device calibration on page 117.The full maintenance procedure is described in the device Service Manual available onlyfor authorized service technicians.80 ORTHOPANTOMOGRAPH™ OP 3DD519207, 19Copyright © by Palodex Group Oy. All rights reserved.See PDM system to determine the status of this document. Printed out 2019-10-07 09:30:50ApprovedReviewed Suuronen Esa 2019-09-19 12:21Approved Lassinen Juuso 2019-10-02 14:37