Kaba Combi B 30 Operating Instructions Manual

Also see for Combi B 30: Operating instructions

Kaba Combi B 30 Operating Instructions Manual Manual pdf 21 page image

Version 2013-08-10Page 45 of 48Operating instructions 82132/3XXX - Combi B 30Description  1. Open the lock using the key (see chapter 11.1)2. Press and 2x 3x 3x3. Press and 2x 2x 3x 3x4. Close the lock again by means of the key (11.2) and mount the rotary handle (11.1)Table 28: Resetting the lockThis procedure can be canceled any time by pressing twice. Alternatively, the modification is canceled if there is noinput for 30 seconds or if the lock is locked using the key before step 3 (see chapter 11.2).11.5 Reconfiguration of the lock after opening by means of the key using softwareFor further details on the procedure refer to the operating instructions for the PC software.After opening the lock using the key according to 11.1 and connecting it to the PC software a complete reconfiguration ofthe lock is possible, namely without knowing or changing the master code. Only an audit entry is performed.12 Further special functions12.1 Connection to the PC softwareThe lock has an additional mini-USB interface on the input unit. The lock can be programmed via this interface using the PCsoftware available as an accessory.The following functions are available when using the additional PC software:a) Reading out auditb) Programming the lock settings using softwareFor further details on this refer to the operating instructions of the PC software.12.2 Additional functions via the signal inputThe lock has an option which allows implementing one of the additional functions via the signal input according to 10.8. Theassignment of the signal inputs is described in the installation manual of the lock. The functions can only be activated with theoptional PC software. The operating behaviour of the lock with different input signals active is described in 10.810.8.12.3 Additional functions via the signal outputsThe lock has 2 signal outputs: Details on assignment of the outputs are given in the installation manual. The following outputsare available:a) Silent alarm. For details on programming refer to chapter 9.5, on operation refer to chapter 10.4,b) Microswitch for bolt monitoring, no additional programming possible.13 Power supplyTwo batteries of type AAA are available in the input unit for power supply of the lock. It is highly recommended to replace themevery 2 years (see chapter 0), irrespectively of how often the lock has been used.

/ 24

Related manuals for Kaba Combi B 30