Kaba E-Plex 5000 Operation Manual

Contents

Kaba E-Plex 5000 Operation Manual Manual pdf 22 page image

18Procedure 5 - Delete Manager Access CodesA Manager Code should be deleted if no longer needed, in order to freethe code number to be assigned to another Manager User. ManagerCodes that might be needed some time in the future should be de-activated rather than deleted.Required User Level: Master1. Put the lock into Pushbutton Programming Mode.2. Enter Command 201# to delete a Manager Code.3. Enter the ID location NNN#, where NNN is the specific ManagerID location, 024 for example.4. Example of complete entry: 201#024#.5. Enter another # to indicate the end of programming.You have now deleted a Manager ID location, and (indirectly) his AccessCode, allowing you to assign that number to another Manager or AccessUser if you wish.Procedure 6 - Delete Service User Access CodesA Service User Access Code is automatically deleted at the end of itsspecified length of time. However, use this procedure if you want todelete the code earlier than the specified expiry time.Required User Level: Master, Manager1. Put the lock into Pushbutton Programming Mode.2. Enter Command 202# to delete Service User Access Code.3. Enter the ID location NNN#, where NNN is the specific ServiceUser ID location, 025 for example4. Example of complete entry: 202#025#.5. Enter another # to indicate the end of programming.6. You have now deleted a Service User ID location, and (indirectly)his access code, allowing you to assign that number to anotherService User if you wish.