Kaba E-Plex 5000 Operation Manual

Contents

Kaba E-Plex 5000 Operation Manual Manual pdf 25 page image

21Procedure 11 - Activate All User Access CodesYou may need to activate all users if you have de-activated the wholegroup - after a lockout, for example. This procedure will re-activate allregular and Service User Access Codes that are not active.Required User Level: Master, Manager1. Put the lock into Pushbutton Programming Mode.2. Enter Command 398#.3. Example of Complete Entry: 398#.4. Enter another # to indicate the end of programming.5. You have now activated all regular User and Service UserAccess Codes.Procedure 12 - Activate / De-activate Passage ModeYou have already programmed a default duration for a door to remain inPassage Mode. When you enable Passage Mode, it becomes enabledfor the duration you have set in Procedure 5 - Program the Duration ofthe Passage Mode period, on page 10.If your length is 6 hours, and you enable Passage Mode at 1:00, it willautomatically re-lock at 7:00. Even if the lock was taken in and out ofPassage Mode multiple times during the six hour period, it will still re-lockafter six hours (programmable) from the original starting period. Thisensures that a lock will never remain in Passage Mode beyond theprogrammed time period.Required User Level: Master, Manager1. Put the lock into Pushbutton Programming Mode.2. Enter Command 399# to activate / de-activate Passage Mode.3. Enter the code where 1 = activate PassageMode and 0 = de-activate Passage Mode.4. Example of Complete Entry to activate Passage Mode 399#1#.5. Enter another # to indicate the end of programming.6. You have now activated Passage Mode on the door.