Kaba c-lever 2662-K5 Installation Manual

Installation Manual Installation39k2evo702 - 201610Kaba c-lever and variants4.6 Installing the inside shield4.6.1 For all c-lever variantsRequirement:• Internal fitting with outside shield or support platesinstalled• All connection cables on e-modules and battery cir-cuit board connected• Outside shield, mortise lock, lock cylinder, leverhandle and internal fitting installedProcedure:1. Note: do not damage the wireless module of the c-lever wireless.Place the inside shield (19) parallel on the internal fit-ting.-> Audibly clicks into place.2. Secure the inside shield with a fixing screw M3 (25).3. Tighten the lever handle fixing screw (18).4. Align the lock cylinder and secure using the cylinderfixing screw.5. Carry out a function check.1925184.7 Other variants4.7.1 Installing variant with wide plateIn order to ensure improved plate support for the inside shield of variants with awide shield (53 mm), proceed as follows.Procedure:1. Place the inside shield parallel on the internal fitting.-> Audibly clicks into place.2. Secure the inside shield with a fixing screw M3 (25).3. Tighten the lever handle fixing screw (18).4. Align the lock cylinder and secure using the cylinderfixing screw.