Basic safety information Installation Manual8 k2evo702 - 201610 Kaba c-lever and variants2 Basic safety informationThis product has been built according to the latest technology and accepted safetyregulations. Nevertheless, handling this product can pose a risk to people and prop-erty.Read and observe the following safety information before using the product.2.1 Proper useThis product has been designed exclusively for use as set out in the chapter ProductDescription. Any other use will be deemed improper use. The manufacturer acceptsno liability for any resulting damage. The user/operator bears sole responsibility forthe risk.2.2 Product changesNOTICENo changes should be made to the product, unless in accordance with changes de-scribed in the instructions.2.3 ESD protective measuresNOTICEDanger of damage to electronic components from electrostatic discharge.If electronic printed circuit boards and components are handled incorrectly, damagemay occur which leads to their complete breakdown or sporadic faults.• When installing and repairing the product, the general ESD protective measuresare to be observed.• When handling electronic components, wear the ESD wrist strap. Connect theend of the strap to an ESD socket or an unpainted, earthed metal component.This will safely and effectively conduct charges away from your body.• Only handle the edges of printed circuit boards. Do not touch printed circuitboards or connecting plugs.• Put removed components on an anti-static surface or in an anti-static shieldingcontainer.• Avoid contact between printed circuit boards and clothing. The wrist strap onlyprotects the printed circuit boards from static electricity on the body. Damagecan still occur due to static electricity on clothing.• Only transport and ship removed modules in ESD-shielding, conductive protect-ive containers.