13The drip tray should be cleaned beforecleaning brew unit. Because waste waterwill be dripped to the tray.Install the drip tray.After istalling the drip tray, screen shows“PRESS SETTING” to start.The brew unit is cleaning.Open the coffee powder container lid andadd the cleaning tablet, close the coffeepowder container lid and press thecleaning button to clean the brew unit.Brew unit is cleaning.Empty the drip tray.Instal the drip tray.After cleaning finished, the machine entersinto “READY” status.Cleaning and maintenanceDescaling the coffee machineThe daily usage will cause calcareous deposited in coffeemachine. The depositing rate vary with the local waterhardness.Decalcifier contains acidic substances that would stimulateyour eyes and skin, so you must strictly comply with thesecurity warnings noted by manufacturer on the packaging.If you have contacted it with your eyes or skin by accident,please wash it with clean water immediately.Only the original decalcifier can be used, use of otherdecalcifier may cause damage to your coffee machine.Dissolve the decalcifier in clean water, and then lead themixed liquid into the water tank. Fully dissolve the decalcifiercan descale the coffee machine more thoroughly.The whole descaling process takes about 30 minutes.The termination during the descaling process will damagethe coffee machine. So once you start the descaling process,please do not terminate it midway.After a centain time use, the screen willdisplay “NEED DESCALE” and “READY”alternately. Now, press setting button toenter the descaling program.Press left and right button to choose“MENU”, then press setting butoon to enterinto program setting menu.Press left and right button to choose“MAINTENANCE”, then press setting butoonto enter into maintenance page.READYNEED DESCALEMENUMAINTENANCEEMPTY TRAYINSTALL TRAYPRESS SETTINGCLEANINGCLEANINGADD TABLETPRESS SETTINGEMPTY TRAYINSTALL TRAYREADY