17Display informationThis chapter will instruct you the information shows on thescreen and the solutions.Causes SolutionsIf the water drip tray is full, anyfunction of making beverage willbe out of service.Take the drip tray out, empty thewaste water in the drip tray andreinstall it to the machine.If the coffee grounds container isfull, any function of makingbeverage will be out of service.Take the coffee grounds containerout, empty the coffee groundscontainer and reinstall it.If water in the water tank is usedup, any function of makingbeverage will be out of service.Fill the water tank with water.If coffee beans in the beancontainer are used up, function ofmaking coffee will be out ofservice.Add beans into bean container,and press any button to release.There is not enough coffee powderin the powder container.Next time when making coffeewith coffee powder, please put afull spoon of powder.The drip tray is not installedcorrectly; any function is out ofservice.Install the drip tray correctly.The water in the pipe inside themachine is not enough; anyfunction is out of service.Press any button to release to runthe water self-check system.Temperature of the machine is toohigh, the machine cannot be used.Power off the main power, and useit 1 hour later.Temperature of the machine is toolow, the machine cannot be used.Increase environmental temperatureto above 10ą.1. Line clossing; 2. Using darkroasted coffee beans or over finecoffee powder; 3. The filter of thebrewer is clogged.1. Press any button to release torun the self-check system; 2. Adjustgrinder wheel to rougher; 3. Startbrewer cleaning procedure (referto P12).Internal parts stucked. Press any button to run the self-testsystem.EMPTY TRAYINSTALL TRAYFILL BEANSLACK OF POWDERPRESSURE HIGHBREW UNIT STUCKTEMPERATURE HIGHTEMPERATURE LOWFILL WATER TANKEMPTY GROUNDSUNIT EMPTY