Kalerm KLM1604 Operation Manual
Also see for KLM1602: Service manual
                        | |
Contents
| 
16Cleaning and maintenanceCleaning the water tankSuggested that, each time adding water, clean the tankthoroughly with running water first.Cleaning water tank regularly (about 1 time per month, orevery time when changing the water filter), it would be betterto use wet rag and some mild cleaning fluid.Because the water tank is made from food-grade and environmentalmaterials, it might be friable to crack. Please gently pick it upand put it down, and never let it fall down. If the water tankdamaged, please contact with customer sevice center.Please remove coffee grounds of the driptray and coffee grounds container.Reinstall the water drip tray to the machine,it returns to “READY” status.Reinstall the water drip tray to the machine,it returns to “READY” status.If the drip tray is full, the machine willautomatically prompt "EMPTY TRAY". Takeout the water drip tray and pour the wastewater.Every time when cleaning coffee grounds and waste water inthe drip tray, please clean the drip tray and coffee groundscontainer.After cleaning drip tray, please wipe dry the 2 pieces ofsheetmetals at the end of the drip tray, and then reinstall thedrip tray to the coffee machine.23INSTALL TRAYREADYREADYEMPTY TRAYCleaning the bean containerPlease do not use water to wash the beans container, it wouldcause the grinder damaged.Please use a dry rag or a paper towel to clean the residuarygrease in the bean container.Because the bean container cover is made from food-gradeand environmental materials, it might be friable to crack.Please gently pick it up and put it down, and never let it falldown. If the bean container lid damaged, please contactwith customer sevice center.Cleaning the coffee machineBefore cleaning the interior of the coffee machine, power itoff, and pull out plug. Never immerse the coffee machine inwater. There will be a risk of electric shock.Regularly check the coffee machine whether there is excessivecoffee powder precipitate inside the machine. You can use abrush to remove the coffee precipitate.Use a dry and soft rag to wipe the touch panel of the machine.As the touch panel is made of glass, please do not hit it toavoid the risk of electric shock once the glass broken.Use a dry and soft rag to wipe the surface of the machine,and never use hard objects to clean coffee leftover on thesurface, otherwise it would cause the surface damaged. |
Related manuals for Kalerm KLM1602
manualsdatabase
Your AI-powered manual search engine