MPEG Decoder Menu (Optional)57MPEG Decoder Menu (Optional)After calling up this MPEG menu, youreceive the PAT list for selecting thedesired video or audio programme fromthe digital measurement for SAT, TV, IFor return path. Moreover, the PIDnumbers of the selected programme aredisplayed.The data from the MPEG decoderappears In the last two lines.Make sure, that the symbol rate and thecode rate are correctly set in the digitalmenu. If this isn’t the case, the message,„Frontend not locked,“ appears. Possiblycontrol this in the constellation analysis.You receive the message „NO PAT,“when no programme list is found.The programme access table shows the available video andaudio channels on the MPEG transport stream. Eight pro-grammes are available; five of them are displayed. Theprogramme, 00, is decoded and the picture is shown.With the arrow softkeys, the desired programme can be selected.Here, the video and audio programme identify codes of theselected programme are displayed. By pressing the buttons„manual V-PID“ and „manual A-PID,“ the PIDs can be en-tered in by hand with four digits.The button „show PAT“ starts the repeated search for the programme list.Status display of the MPEG decoder:Norm: dig. television, dig. audio,data broadcast or reservedStatus: running, not run, wait sec, pausing,undefined or reservedCA: conditional access yes /noScrambled yes / noshowPATmanualV-PIDmanualA-PIDBACKVideo-PID: 1040 MPEG 2VAudio-PID: 1042 MPEG 2ANorm: dig. televisionStatus:running CA:no---- PAT (08) --00-->ZDF <3satKiKaPhoenixORF---- PAT (08) --00-->ZDF <Video-PID:1040 MPEG 2VAudio-PID:1042 MPEG 2ANorm: dig. televisionStatus:running CA:no▲▼▲▼
