Sat measurement21Tracking SatellitesThe "SCAN" function can search for satellites whose exact transponderfrequencies are unknown. The frequency range from 1000 to 2100 MHzis scanned continuously to detect signals. If signals are received, thereception level is indicated in a bar display. The measuring range can beset to three different sensitivity levels.The level can be monitored with an audio tracking signal, the volumebeing proportional to the level of the signal received. The volume of theaudio tracking signal can be set with the volume control.Overview of commands in SCAN[2ndF] [SCAN] Switch over to SCAN operation.[-] [+] Change the measuring range of the bar display.Level range 1: high input levelLevel range 2: medium input levelLevel range 3: low input levelExit SCAN by pressing [2ndF] twice.LC display:• Level range 2: medium input level• SAT mode• Bar displayExampleCalling up the SCAN function• Press the [2ndF] and [SCAN] buttons.• Rotate the antenna until a level tendency is visible on the bar display.• Rotate the antenna until the bar display has reached its maximum.• If necessary, decrease or increase the sensitivity with the [-] and [+]buttons.Exit SCAN by pressing [2ndF] twice.0LEV-Range:2 SAT> Î
