Sat measurement26DiSEqC (Digital Satellite Equipment Control)The DiSEqC system is used to control systems with extended controlfacilities. DiSEqC uses serial, bidirectional transmission with one masterand one or more slaves. The data bits are formed by modulation of thepulse width of the available 22 kHz carrier and are superimposed with600 mVss of the LNB remote voltage. The digital code words are made upof 8 data bits and one additional parity bit to detect transmission errors.Several code words form a DiSEqC command. Input of the code words isin hexidecimal code.code wordsFraming P Address P Command P Data Pparity bitThe MSK 24 can also transmit signals to DiSEqC 1.0 but it cannotreceive them.Overview of commands in DiSEqC[2ndF] [SAT-CTRL] Call up the DiSEqC menu[0]...[9] Enter the code words in hexadecimal code 0...9[.] [0]...[5] Enter the code words in hexadecimal code A...FButton Hex Code[.] [0] A[.] [1] B[.] [2] C[.] [3] D[.] [4] E[.] [5] F[-] or [+] Move the cursor among the various code words:Framing, Address, Command and Data[.] [6] Delete the entire command string up to the cursorposition[ENTER] Send the command stringExit the DiSEqC menu by pressing [2ndF] twice.Î
