Kathrein UFC 861si Operating Manual

Contents

Kathrein UFC 861si Operating Manual Manual pdf 46 page image

46USER SETTINGSUse the buttons here to select the standard recording time. If you forget to stop a recording youstarted manually, it is automatically stopped by the receiver when the standard recording time elapses.You can choose between 30 minutes and 4 hours, in 30 minute increments.STANDARD RECORDING TIMEWhen you have made all the settings, press the button to save them.SAVEEPG SETTINGHere use the buttons to select the number of minutes before the time set in the EPG at which therecording should start. You can choose a value between 1 minute and 10 minutes, in 1 minute increments.The recording will start that number of minutes before the due time. This allows a contingency for smallvariations in transmission times. Unwanted parts of the recording can later be discarded, as described in theChapter “Recording List” under “Edit Recordings”, “Cut”.LEAD-IN TIME FOR RECORDINGHere use the buttons to select the number of minutes after the time set in the EPG for which therecording should run on. You can choose a value between 1 minute and 30 minutes, in 1 minute increments.The recording will stop that number of minutes after the due time. This allows a contingency for smallvariations in transmission times. Unwanted parts of the recording can later be discarded, as described in theChapter “Recording List” under “Edit Recordings”, “Cut”.RUN-ON TIME FOR RECORDINGDYNAMIC SI HANDLINGUse the buttons to select “On” or “Off”. When the receiver is switched on, it automatically uses theprogram names broadcast by the transmitter. Setting this to “Off” allows you to change the program names,and prevents the receiver automatically changing those names back to the broadcast setting.