Kathrein UFC 861si Operating Manual

Contents

Kathrein UFC 861si Operating Manual Manual pdf 79 page image

79You can record encoded programmes even when the CA module with the Smartcard is not inserted.However, to view what you have recorded the CA module with Smartcard must be inserted in the CommonInterface on the receiver.You can also decode a recording after having recorded it, so as to be able to view it in future withoutthe CA module/Smartcard combination. For this the CA module with Smartcard must be inserted in theCommon Interface on the receiver.Encoded recordings are indicated by a key sign at the end of the line (after the recording duration).Use the buttons to select the encrypted recording, and press the " (yellow) button. On thescreen which the receiver then displays use the buttons to select “OK” and press the button toprepare decoding. The receiver then displays the following message:“Decoding will be started in standby”.Press to acknowledge this message. As soon as you next switch the receiver to standby the recordingwill be decoded. The progress of decoding is indicated on the display. Wait for the decoding to completebefore switching on the receiver.The receiver saves both the decoded and the encrypted programmes on the hard disk. If you wish you candelete the encrypted programme (this is not deleted automatically by the receiver).DECODING A RECORDINGRECORDING LISTTo view recordings that were made from a protected channel you must enter the four-digit PIN code (factorysetting “0000”).BLOCKED RECORDINGSEDIT RECORDINGS/FOLDERSBefore you define what type of editing you would like to perform, press the #(blue) button to select whetheryou would like to edit a TV or radio broadcast. Recordings can be sorted as described under “Playbackrecordings”.Use the (red) button to access the various editing options. Switch between editing options by pressing the(red) button. Editing functions can also be used on folders. To do this, both the folder view and the desiredfolder must be selected. Press the #(blue) button to perform the desired function for the selected folder:- Delete (for recordings and folders)- Move (for recordings and folders)- Rename (for recordings and folders)- Copy (for recordings only)- Cut (for recordings only)