On Screen Display (OSD)20TV / Radio Channel MessageThe channel message is displayed for a few seconds each time youchange the programme, or constantly if you press . The “i” indicatesi” indicatesithat a channel is being received even if no picture can be seen (e.g. inradio mode).The TV symbol indicates a TV channel - adjacent to it is theselected programme, whether video text can be received and thecurrent time. The “+” in the third line stands for the programme selectionfrom the overall list (when selecting from favourites list, an apple symbolappears instead of the “+”). This is followed by the programme titleand the start and end times of the current programme, if this data isbroadcast by the programme provider.The message for the set radio channel has the same layout. A radiounit symbol in the top left-hand corner indicates that it is a radiochannel. Broadcast times and text are only shown if these aretransmitted by the radio broadcaster.ChannelmessageTVChannelmessageRadioError Message“Weak or no signal” indicates that an error has occurred in thereceiving system or in the receiver settings, or that the transponder is notsending. The channel message then shows a satellite antenna insteadof the “i”. Check the SAT-IF connection and the LNB confi guration. Thei”. Check the SAT-IF connection and the LNB configuration. Theilist of service settings at the end of this manual can be used to help youdo this.
