Kathrein UFD 515 Operating Manual

Also see for UFD 515: Mode d'emploi Operating manual Mode d'emploi

Contents

Kathrein UFD 515 Operating Manual Manual pdf 15 page image

Connection and start-upLNB-supply voltageIf the feed system (LNB) is powered by an external supply voltage and the LNBsupply voltage is not used for switching over polarity (e.g. Kathrein feed systemUAS 330), the LNB supply of the receiver must be set to "OFF" (see section "In-stallation menu, LNB configuration“).TV and video recorder connectionUse a SCART cable to connect the satellite receiver (TV SCART) and TV set.If your TV set is equipped for stereo output, you can receive the sound in stereo viathe SCART connection.Also use a SCART cable to connect the satellite receiver (VCR/AUX SCART)and the video recorder.Audio connectionIf you wish to reproduce the sound via a hi-fi system, connect a correspondingCinch cable from the audio Cinch sockets on the receiver to the input sockets onyour hifi system.The digital output is designed to facilitate connection to a Dolby Digital System.Inserting batteries in the remote controlRemove the cover on the battery compartment on the underside of the remote con-trol.Insert the two supplied batteries in the remote control. Ensure correct polarityof the batteries, the + and – markings are indicated inside the battery com-partment.Slide the cover back into the casing and lock in position.Used batteries are special waste! Therefore, do not throw batteries into the house-hold waste but rather deposit them at a collection depot for old batteries!15