Control, displays and connectionControl, displays and connectionThis section contains a brief description of all the control elements, displays andconnections. The key symbols presented here are also used when describing op-erating sequences.View of front panel(Flap folded down)View of rear panelIF INPUT DIGITAL920-2150MHz14/18V max. 400mA22kHzVCRAUX UFD 515 260473TVIF OUTPUTDiSEqC 1.1DATA I/OAC 88V-264V~50/60 Hzmax.30WElektroschock-Gefahr!Nicht öffnenLRAUDIO VIDEODIGITAL1 2 3 4 5 6 7 8 9 101 2 3 4 5 6 7 8 9Front panel controls and displays Rear panel controls and displays1 On/Off switch (with mains separation)2 Menu button to call up or exit from menusor submenus3 Indicator to confirm remote control signal4 Select-buttonto confirm a selection5 Power indicator6 Standby indicator7 Cursor keys to step through menus andprogrammes, and for adjustment of the vol-ume (corresponds to the remote control)8 LED display (4-charachter 7-segment dis-play) for display of programme position andtime9 Common Interface for Pay-TV cards10 Pressure catch for front flapOpen by lightly applying pressure on theupper right-hand side1 Audio output2 Cinch sockets, left and right channel2 Dolby Digital-output (AC3)3 Video output (FBAS)4 Scart socket TV connection5 Scart socket VCR/AUX connection6 DATA socketInterface for serial data transmission(Service)7 Satellite IF signal inputOutput of the LNB supply voltage and con-trol signals (22-kHz and DiSEqC 1.1)8 Satellite IF signal outputOutput for a analogue secondary receiver.The Sat IF signal is looped through.9 Mains voltage supply line9