Kathrein UFD 520 Operating Manual

Also see for UFD 520: Mode d'emploi Mode d'emploi

Contents

Kathrein UFD 520 Operating Manual Manual pdf 27 page image

Programme list - TV/radioOnly alphanumerical and decimal entries are accepted at the positionsname,video PID (programme identification),audio PID,PCR PID (PCR = Programme Clock Reference) andaudio PID dig.Incorrect PID entries are rejected with the displayed message.Incorrect parameterPress the button 3 times to return to the TV screen. Confirmation is given thatyour changes have been saved and the information display of the programme cur-rently received appears for several seconds on the screen. The new programme isadded to the end of the existing programme list.You can obtain the necessary PIDs from relevant TV and satellite magazines, theinternet as well as from SAT 1 teletext. Refer to section "Operating instructions" forinformation on how to make alphanumeric entries.Never change the PIDs without good reason as they affect the identification of thereception signal.To add analogue programmesAnalogue television programmes always occupy one transponder. Therefore, pro-ceed like newly setting an analogue transponder (see section "Analogue-transponder").Analogue programme listWith the reception of analogue stations,the programme list is requested withand is displayed in white. To indicate thedesired programme, use the and buttons to move the arrow onthe left side of the list either page-by-pageor line-by-line.Press to switch to the indicatedprogramme and the info bar is displayed white for a short time.27