Controls, displays and connectionsControls, displays and connectionsThis section contains a brief description of all the control elements, displays andconnections. The key symbols presented here are also used when describing op-erating sequences.View of front panel(Flap folded down)View of rear panelIFINPUTDIGITAL920-2150MHz14/18Vmax.400mA22kHzVCRAUXUFD520260498TVIFOUTPUTDiSEqC1.1DATAI/OIFINPUTANALOG920-2150MHzAC98V-249V~50/60Hzmax.30WElektroschock-Gefahr!NichtöffnenLRAUOVIDEODISELECTMENUDigital Video BroadcastingDIGITAL ANALOG SATELLITE RECEIVER1 2 3 4 5 6 7 8 9 101 2 3 4 5 6 7 8 9Front panel controls and displays Rear panel controls and displays1 On/Off switch (with mains separation)2 Menu button to call up or exit from menusor submenus3 Indicator to confirm remote control signal4 Select-buttonto confirm a selection5 Power indicator6 Standby indicator7 Cursor keys to step through menus andprogrammes, and for adjustment of the vol-ume (corresponds to the remote control)8 LED display (4-charachter 7-segment dis-play) for display of programme position andtime9 Pressure catch for front flapOpen by lightly applying pressure on theupper right-hand side1 Audio output2 Cinch sockets, left and right channel2 Dolby Digital-output (AC3)3 Video output (FBAS)4 Scart socket TV connection5 Scart socket VCR/AUX connection6 DATA socketInterface for serial data transmission(Service)7 Satellite IF signal inputOutput of the LNB supply voltage and con-trol signals (22-kHz and DiSEqC 1.1)8 Satellite IF signal output loop-through Sat IFsignal9 Satellite IF input for analogue reception.External coax-bridge from 8 to 9 included indelivery.10 Mains voltage supply line9