101Main menu - Service menuUpdate Channel ListsThe process for updating the channel list via the USB is identical to that used for updating the software(channel list name: channel.xml).Save Channel list to USBThe receiver offers you the option of saving the channel list you are currently using to a USB device, sothat you can recover it later if required.First connect your USB device to the receiver, using a free USB port on the receiver. Then select the“Save Channel List to USB” selection field and confirm you want to start saving by pressing the button. During the saving process you will see the “Software Update by USB” menu; howeveryou cannot navigate within this menu until the saving process has been completed.The function “Update Channel List” allows you to reload the saved channel list to the receiver at a laterdate, should you so require.The channel list “channel.xml” is copied to the USB storage medium using thefollowing folder structure:Main folder: KathreinSubfolder: ∟ ufs913Factory ResetAfter calling up the menu, you will see thefollowing on-screen display:Here you can restore the channel listand the installation settings to the factorysettings. You can use the buttonsto select the components to be restoredto their factory settings. In each case usethe buttons to select “Yes” or “No”.In addition you can select whether, after restoration, the first installation should be started automatically,as with the initial set-up.Once you have defined all the settings, use the buttons to switch to the “Start Reset” selectionfield and confirm the start using the button. The components you selected will now be reset to theirstatus at the delivery of the unit.
