126Main menu - InterfacesHDD ManagementAfter calling up the menu you will see thefollowing on-screen display (example):If you select “On”, you can view another encrypted channel through the same CA module and thecurrently selected transponder at the same time as recording an encrypted channel. The number ofother encrypted channels that you can view depends on the CA module you are using.Here you can choose between the settings “On” and “Off”. If it is set to “On”, programmes recordedwith encryption will be automatically decrypted by the receiver in standby mode. For this, it is essentialthat the CA module with a Smartcard is located in the common interface of the receiver. Manualselection for decryption in standby via the recording archive (My recordings) is then not required.Automatic Decryption in standby modeUse the buttons to select the desired action and confirm using the button. The followingon-screen display appears (example: formatting the recording archive):During formatting, all data will be deleted from the relevant directory. Deleted datacannot be restored – it is irrevocably deleted!Press the button to confirm, or the button to cancel.You have the following selection options:- Format Record Archive (delete)- Format Media Archive (delete)- Make dedicatd HDD *)You can only use the fi rst two functions if an archive hard disk has already been set up.Format a recording/media archive
