98Software update (by satellite)Main menu - Service menuAfter calling up the menu you will first seethe following on-screen display:All available modules/componentsfor your receiver will be loaded andthen displayed.Software updates from the satellite areavailable for limited periods. If a softwareupdate is no longer available from thesatellite, it can still be downloaded fromthe Internet. See also “Software updateby USB in this section”. The loading process may takeup to 60 minutesThe following on-screen display thenappears:Use the buttons to select theparameters to be updated during theupdate procedure.x.xxShow infotextPress the button to display the info text for the available downloads. These indicate the mainfeatures of the new operating software, based on which you can decide whether you want to install thenew software on your receiver.Software updateSelect “Yes” here if you wish to install new software; select “No” if you are satisfied with your oldsoftware version and the changes in the new software are not relevant to you.Update channel listSelect “Yes” here if you wish to install the new channel list, or “No” if you wish to retain your old channellist. Prior to this you can however also save your old channel list via the menu “Software Updateby USB”, “Save channel list on a USB device”, so that if you do not like the new channel list youcan revert back to the old one.If a new channel list is loaded, this will be automatically regenerated after each factory reset (RestoreFactory Default settings) (see “Service Menu”, “Factory Reset”, “Restore channel list”).
