Kathrein UFS 923 Operating Manual

Also see for UFS 923: Operating manual

Contents

29 Start slow rotation to the eastOnce you have reached the desired east / west limit, switch to the respective field "Set current position for"****" limit" and press the  button to confirm.If you subsequently wish to delete the set limits, switch to the selection field "Reset limit positions" and pressthe  button to confirm deletion of the limits. You can then set new values for the limits. Once you haveset all the limits, press the  button.Press the  (green) button to move to the next menu.The following on-screen display appears:LNB Type:If your reception system does not have a Universal LNB, use the  buttons to select the LNB typesthat are used in your reception system. You can choose from the following LNB types:- Universal or- Simple or- User-definedLNB frequency (MHz):You only need to specify this data if your LNB type is not "Universal LNB". The data required differ for the set-tings “Simple” and "User-defi ned". On this aspect, also refer to the documentation supplied with your LNB.- Selection “Simple” LNB: Use the number pad to enter the LNB frequency- Selection “User-defined”: Press the  button to enter the required low, high and limit frequen-cies. The entry is made using the number keysConnection and start-up