114Main Menu - SettingsCustomize Screen MenuAfter calling up the menu, you will see thefollowing on-screen display:Individual items are selected using the buttons.Changes to the current settings can bemade using the buttons.Sleep TimerYou can use the “Sleep Timer” function to specify a remaining running time, after which the receiver will auto-matically switch to “Standby” mode. To do this, use the buttons to select “On”. Exit the menu usingthe button. Now press the on/off button. The receiver will display a window, in which you can use the buttons to select the desired remaining running time for the receiver. The receiver will then continuerunning in the normal way and, when remaining running period that was input expires, automatically switchto “Stand-by” mode.If you do not start to enter the remaining running time within five seconds of the window appearing, thereceiver will automatically revert to “Standby” mode.Channel banner display duration (channel information)Select here how long the channel information should be displayed after a change of channel. The optionsavailable are 1, 2, 3, 4, 5 or 6 seconds.Playback Banner DurationSelect here how long the playback information should be displayed after the start of playback. The optionsavailable are 1, 2, 3, 4, 5 or 6 seconds.Display Volume BarSelect here whether, on changing the volume using the receiver remote control, the volume bar should bedisplayed on the TV screen (select: “On”) or not (select: “Off”).Front Display BrightnessSet the front display brightness here. Here you can select the most comfortable setting for your ambientlighting. Your available options are:- Bright- Medium- Dark or- Off (display is not switched on/lit during operation)
