Kawai Digital Piano CN21 Owner's Manual

Page26FUNCTION MODE54) TUNINGThe TUNING function allows the piano’s pitch to be finely adjusted, and may prove useful when playing withother instruments.The factory default value is set to the modern standard A = 440.0 Hz and can be adjusted in 0.5 Hz increments. Step 1Press and hold the METRONOME and SOUND SELECT buttons at the same time, then press the keyassigned to the TUNING function.A tuning tone will be played. Step 2While still holding down the METRONOME and SOUND SELECT buttons, press the '- (off)' or '+ (on)'keys to lower or raise the tuning pitch by 0.5 Hz, or enter the desired tuning pitch as a three digit numberusing the number keys. For example, to set the tuning pitch to A = 441.5 Hz, first press the keys '4', '4', and '1', then press the '+ (on)' key.Alternatively, fi rst press the keys '4', '4', and '2', then press the '- (off)' key.5) REVERBThe REVERB function adds reverberation to the sound, simulating the acoustic environment of a recital room,stage, or concert hall. There are three types of reverb available: Room, Stage and Hall.The most suitable reverb setting is applied to each sound type automatically. Step 1Press and hold the METRONOME and SOUND SELECTbuttons at the same time, then press the key assigned to theREVERB function. Step 2While still holding down the METRONOME and SOUND SELECTbuttons, press one of the following keys to select the Reverb type:Key 1: ROOMKey 2: STAGEKey 3: HALL The reverberation sound increases in length as the setting is changed from ROOM -> STAGE -> HALL. The reverberation function will be turned on upon selecting a reverb type.The REVERB function is automatically activated when the CN21 piano is turned on. Step 3To turn on/off the REVERB function, press and hold the METRONOME and SOUND SELECT buttons atthe same time, press the key assigned to the REVERB function, and then press the '+ (on)' or '- (off)' key.0987654321+- onoffnumber keysReverb OffReverb OnKey 1: ROOMKey 2: STAGEKey 3: HALL