Kawai MP6 Owner's Manual

Also see for MP6: Brochure & specs Owner's manual

Contents

Kawai MP6 Owner's Manual Manual pdf 44 page image

446. MENU Buttons6.2.37 Zone TransposeThis parameter sets the amount of transposition for the selected zone. Theavailable range is three octaves up or down (+/-36 semitones).Note:To set the master transpose, press the TRANSPOSE button and set the value.6.2.38 VolumeThis parameter sets the volume level for the selected zone. The value can bechanged by using the FADER or VALUE buttons.For External zones, when the MIDI Transmit Control Change is “Off”, this pagewon’t be displayed.6.2.39 PanInt This sets the pan-pot (right and left balance).Ext This sets the pan-pot value that will be transmitted to external soundmodules. If the MIDI Transmit Control Change is “On”, the value istransmitted when a SETUP is recalled. When the MIDI Transmit ControlChange is “Off”, this page won’t be displayed.* The value changes from L64 to R63.6.2.40 Fine TuneInt This is a fine tuning function for values smaller than a semi-tone.Ext This is used to transmit fine tuning settings to external sound modules. Ifthe MIDI Transmit Control Change is “On”, the value is transmitted whena SETUP is recalled. When the MIDI Transmit Control Change is “Off”, thispage won’t be displayed.* The value changes from -63 to +63.1 Concert GrandSZone Trans= 01 Concert GrandSZone Trans= 01 Concert GrandSVolume = 1271 Concert GrandSVolume = 1271 Concert GrandPan = R101 Concert GrandPan = R101 Concert GrandSFine Tune= 01 Concert GrandSFine Tune= 0