6310. SYSTEM Button10.2.22 LED BrightnessThis adjusts the brightness of the LEDs. You can choose from High or Low.The Low setting is designed for dark stages, while the High setting is good forbright ambience.10.2.23 Out ModeSometimes it is convenient to have two mono outputs instead of a stereooutput.In this case one mono output can be used for your own monitor system and theother goes to the mixing console.Stereo The signal on the Line-Outs is normal stereo.2xMono The signal on the Line-Outs is mono on both jacksNote:* To avoid unexpected sound issues some stereo effects like AutoPan will be turned offwhen 2xMono is selected.10.2.24 Foot Switch ModeThis parameter sets the mode of FootSW's function.Normal: The type of controller assigned to the footswitch is a common SETUPparameter "FootSW CC#". (see page 46)Setup+: The footswitch is pushed 1 time, and Setup number will be increased by 1.Note:* When the value is ‘Setup+’, the FootSW CC# page will not be displayed.SYSTEMLED Bright.=HighSYSTEMLED Bright.=HighSYSTEMOut Mode =StereoSYSTEMOut Mode =StereoSYSTEMFootSW =NormalSYSTEMFootSW =Normal
