6210. SYSTEM Button10.2.18 MMC On/OffThis parameter determines whether MMC (MIDI Machine Control) information issent when pressing the RECORDER CONTROL buttons.On MMC information is sent when using the RECORDER CONTROL buttons.Off MMC information is NOT sent when using the RECORDER CONTROL buttons.10.2.19 MMC AssignWhen the MMC setting (10.2.18) is set to ‘On’, this parameter determines whichMMC commands are sent when pressing the RECORDER CONTROL buttons.Button MMC CommandPLAY/STOP PlayPauseRecord StrobeREC Record PauseRecord ExitRESET StopFF Fast ForwardPauseREW RewindPauseLOOP Deferred PlayNote:* This parameter will only be displayed when MMC Transmit (10.2.18) is set to ‘On’.10.2.20 MMC Device IDThis parameter determines the Device ID of the MMC (MIDI Machine Control).10.2.21 LCD ContrastThis parameter adjusts the contrast of the LCD display.As the value changes higher, the contrast gets sharper. The value changes from1 to 10.SYSTEMMMCtransport=OnSYSTEMMMCtransport=OnSYSTEMPLAY =PlaySYSTEMPLAY =PlaySYSTEMMMC Dev.ID = 127SYSTEMMMC Dev.ID = 127SYSTEMLCD Cont. = 10SYSTEMLCD Cont. = 10
