33Main Operation Adjusting the organ’s drawbar registrationWhile the tonewheel edit screen is shown in the LCD display, andthe 16’ drawbar group tab is selected:Use the zone faders to adjust the position of the first four organdrawbars.16’ drawbargroupselecteddrawbarsadjusted byzone fadersTurn the control knobs (A, B, C, D) to adjust the position of thenext four organ drawbars.Finally, press the +/YES or –/NO buttons to adjust the position ofthe last organ drawbar. Changing the selected drawbar groupPress the F1~F4 function buttons to select which four drawbarsare adjusted by the zone faders.2’ drawbargroupselecteddrawbarsadjusted byzone faders Changing organ percussion settings and rotary effect speedWhile the tonewheel edit screen is shown in the LCD display:Press the MAIN button to turn percussion ON or OFF, and theSUB buttons to adjust the percussion characteristics.PercussionenabledFast rotaryPress the SW1 button or FSW pedal to change the speed of therotary effect from slow to fast.MAIN:16’SUB1:5 1/3’SUB2:8’SUB3:4’Knob C:1 3/5’ drawbarKnob A:2 2/3’ drawbarKnob D:1 1/3’ drawbarKnob B:2’ drawbarDrawbar:–/NO or +/YES:1’ drawbar* The control knob and –/NO and +/YES button drawbar assignments willchange depending on the selected zone faders.Volume:Normal / SoftSpeed:Slow / FastHarmonic:2nd / 3rd
