Kawai MP7SE Owner's Manual

Contents

42EDIT MenuEDIT Menu parameters (INT mode)3 Sound1. Master Volume value : 0 ~ 127This parameter adjusts the total SETUP volume, allowing thevolume of multiple SETUPs to be balanced.* This parameter is common for all four zones.* This parameter is not stored to SOUND but to SETUP only.2. Panpot value : l64 ~ r63This parameter adjusts the left/right position of the selectedsound within the stereo field.3. Filter Cut-off value : –64 ~ +63This parameter adjusts the frequency of the cut-off. Raisingthe cut-off level increases the brightness of the sound, whilelowering the cut-off level results in a duller sound.4. Filter Resonance value : –64 ~ +63This parameter adjusts the amount of the harmonic overtonearound the cut-off frequency for the selected sound.5. DCA Attack Time value : –64 ~ +63This parameter adjusts the length of the attack. Higher valuesincrease the attack time, resulting in a longer, slower attack forthe selected sound.6. DCA Decay Time value : –64 ~ +63This parameter adjusts the length of the decay from peak levelto sustain level for the selected sound.7. DCA Sustain Level value : –64 ~ +63This parameter adjusts the volume level of the sustain heardwhile the key is held for the selected sound.8. DCA Release Time value : –64 ~ +63This parameter adjusts the amount of time required for thesound to fade out after the keys are released for the selectedsound.9. DCF Attack Time value : –64 ~ +63This parameter adjusts the length of the filter’s attack. Highervalues increase the attack time, resulting in a longer, slowerattack for the filter.10. DCF Attack Level value : –64 ~ +63This parameter adjusts the level of the filter’s attack.11. DCF Decay Time value : –64 ~ +63This parameter adjusts the length of the decay from peak levelto sustain level for the filter.12. DCF Sustain Level value : –64 ~ +63This parameter adjusts the level of the filter’s sustain heardwhile the key is held for the selected sound.13. DCF Release Time value : –64 ~ +63This parameter adjusts the amount of time required for the filterto fade out after the keys are released.14. DCF Touch Depth value : –64 ~ +63This parameter adjusts how much the velocity affects the filterenvelope depth.15. DCA Touch Depth value : –64 ~ +63This parameter adjusts how much the velocity affects theamplitude envelope depth.* With the exception of Volume, the Sound parameters on these pages willnot be available when tonewheel organ mode is selected.