Installation – Connecting the camera to your network using WPS43Connecting the camera to your network using WPSAn alternative method of connecting your camera to your network is by using WPS. WPS is a quick, simple and secure method of adding devices toa network. If you have a router which supports WPS follow the steps below, otherwise, please use the wired mode of setting up the camera.Note: Please complete the following steps within 2 minutes.1. Press the WPS button on your wireless device to activate the function.2. Press the WPS button of your wireless network camera for at least 5 seconds. The WPS light will start to blink green. Within 2 minutes, theWPS light will either show a solid green light indicating that the connection was successful or the light will stop flashing and will not beilluminated. If the light is not illuminated after 2 minutes, the connection was unsuccessful. Try repositioning the camera or router and try theWPS connection again.
